Micro SD To SATA 2.5 Inch 4 TF To SATA DIY SSD Solid State Drive Box Hard Disk Box Adapter Expansion Riser Card JM20330 Chip

Short Description:

(Product does not contain tf card)
Application: TF card (micro SD card)
Interface: SATA
Product Features:
Replace SATA with 4 Micro SD cards, which can be used for system booting through Micro SD
Support SATA hot plug
Does not support UHS-I
No driver required
Support system: Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux (Note: EXT4 file system is not supported)
Instructions for use of 4 TF to SATA adapter cards:
1. Before using this product, please insert the TF card into the corresponding TF socket, and then connect the SATA power and SATA data cable to the SATA host device. After power on, the LED light flashes, indicating that the TF data is read normally.
2. After the initial use and the TF card configuration change, the TF card needs to be initialized and formatted. After the formatting is complete, you can perform any data operations on the TF card.
Precautions for use:
1. This product can use 1 TF card, 2 TF cards, and 4 TF cards at the same time. It does not support 3 TF cards at the same time.
2. Please pay attention to the card insertion sequence when using: when using 1 TF, please insert the TF card in the TF1 card socket, when using 2 TF cards, please insert the TF card in the TF1, TF2 card socket, and so on. If you insert the cards out of order. The product will not be able to recognize the TF card normally.
3. Use the same TF card as much as possible. When using TF cards of different capacities, after grouping RAID 0, the capacity is a multiple of the minimum capacity TF card and the number of TF cards. (For example, one 2G, the other 3 32G, then the minimum capacity is 2G*4=8G)
4. TF card does not support hot swap.
5. For the safety of your data, please make a backup of your important data before use.
6. After the TF card is set to RAID 0, the position of the TF card cannot be changed, otherwise the data may be damaged (after the TF card is initialized, the data will be damaged). Please mark the location of the TF card before use to prevent the location from being exchanged.