OTHERS Products
-
AR9271 802.11n 150Mbps Wireless USB WiFi Adapter 3dBi WiFi Antenna Network Card for Linux
- High-performance Qualcomm atheros chip
- Support ROS soft routing
- Support Roland piano
- Support XP_7_8_10
- Support LINUX software such as LINUX, bottle, KALI, UBUNTU, etc.
- Portable WIFI, AP
- Support wireless TV TCL, Changhong, Skyworth, Hisense, Konka (all support as long as it supports AR9271)
- Internet is stable and fast
-
A+E key E key M.2 NGFF wireless network card to M key PCIe M.2 NGFF transfer card
- This product only supports A+E key and E key M.2 NGFF PCIE protocol wireless network card type wireless modules.
- Some M.2 NGFF wireless network cards only support the Windows 10 operating system (9260AC, 9260NGW only support the win 10 system). Some M.2 NGFF wireless network cards do not support AMD motherboards (for example, 9560AC and 9260AC do not support AMD motherboards).
- The adapter card does not need any driver, because the adapter card does not have any chips, so there are no so-called drivers and compatibility issues. What you need to install is the driver of your own wireless network card module itself, the wireless network card module It will not work properly without the driver or if the driver is installed incorrectly!
-
M Key M.2 PCI-e to AHCI SSD Adapter Card for 2013 2014 2015 MacBook Air A1465 A1466 Pro A1398 A1502 A1419
- Application
- 2013 version Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294)
- 2014 version Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2)
- 2015 version Pro retina A1502 A1398(MF839 MF840 MF841 MJLQ2 MJLT2)
- 2013-2014 version Air A1465 A1466(MD711 MD712 MD760 MD761)
- 2015 version Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2)
- Mac Pro ME253 MD878,iMAC A1419(Late 2013 and newer)
- Not support following NGFF PCIe SSD:
- NP800
- SM256
- SM951 PCIE-NVME (MZVPV128HDGM MZVPV256HDGL MZVPV512HDGL),
- PM951 PCIE-NVME (MZFLV128HCGR MZFLV256HCHP MZFLV512HCJH),
- 950 PRO (MZVKV256 MZVKV512) and other PCIE-NVMe SSD
-
Pci-e1x Gigabit Network Adapter Built-in Wired Network Motherboard Drive-free PCIe to RJ45 Expansion Card
- Pci-e to RJ45 Gigabit cable network adapter
- This product uses gigabit network controller, adaptive 10/100/1000Mbps Ethernet network,
- The user can extend the RJ45 network interface through the computer PCI card slot.
- High – speed 100 – megabit network card can meet the needs of high – speed file transfer in area network
- This product is used for servers to provide high-speed connections between servers and switches and improve the response speed of network backbone systems.
- 100 Mbit/s NIC has lower CPU usage, supports 32-bit data transfer, good stability, and rich operating system support
- High quality control IC works fine
- Chip welding strong, uniform, neat layout, good master ICLow fever in use process, operation stability
- 1000 MBPS Ethernet card interface
- lower CPU usage, built-in buffer support 32-bit data transmission, improve the network speed
- Thickening plating gold finger PCI – E x1
- Contact contact more reliable, reduces the hardware failure, avoid the phenomenon such as a sudden disconnect- Ex1 PCI interface can connect x1x4 by 8 x16, general graphics interface
- Focus on “core” realtek original chips”
- Carrying red RTL8111D chip, without having to manually install the driver, plug and playIts stability and compatibility is better than common chips
- Support for multiple systems
- Supports Windows 98 / ME / 2000 / XP/Vista/Win7/Win8/Win10 Mac Os V8.6 or higher version of the operating system
- Good compatibility
-
2230 2242 2260 2280 M.2 NGFF to 2012 Pro for SSD Adapter Cards
- Product Description
- Black, green The function is the same, but the adapter card has different appearance sizes. Please choose the appropriate style according to your needs.
- Only the NGFF M2 hard disk of B KEY is supported, and M2 of MKEY PCIE protocol is not supported.
- Upgrade the gospel of Apple hard drive. Buy an NGFF hard drive on this adapter card, and change it into Apple’s 2012 hard drive. Only suitable for Apple notebooks in 2012, not applicable in other years.
-
24P Connector Mainboard Motherboard ATX 24Pin to 24Pin 90 Degree Power Adapter Connector for ATX Cable better Power Supply
- Features:
- The adapter is designed for changing ATX 24PIN cable installation direction
- You can install the 24PIN power cable from vertical to horizontal direction with this adapter
- Which will solve the PSU installation for the limited height chassis.
- Specifications:
- Color: Black
- Quantity: 5 Pc
- PCB Color: Blue
- Material: EVA
- Installation size: approx.52x20x31mm/2.04×0.79×1.29”
- Note:
- Transition: 1cm=10mm=0.39inch
- Please allow 0-2cm error due to manual measurement. pls make sure you do not mind before you bid.
- Packing List
- 24 pin to 24 pin Power Connector Adapter
-
USB Header Adapter USB3.0 19P/20P to TYPE-E 90 Degree Converter Front TYPE C Plug-in Port for Computer Motherboard
- Support all motherboard USB3.0/3.1 (19pin) ports
- For Inte1 internal 20pin connector can be connected to the USB TYPE-C output terminal of the front I/0 panel
- USB3.0 internal 19pin connect to USB3.1/3.2 internal TYPE-C 20pin adapter
- Internal 20pin (Key A) interface support (Gen2-gen1), USB3.0 USB2.0 and USB1.1 devices
- No need to install drivers
- Vertical switching, small size, no interference with multi-layer circuit boards in other locations, integrated differential
- signal optimization technology, stable signal, strong anti-interference ability.
-
USB3.0 19P/20P to Type-C 90 Degree Adapter PH73A PH73B Adapter Mainboard for Desktops PC Supply
- Features:
- Motherboard USB Header Adapter USB3.0 19pin 20pin to TYPE-E 90 Degrees Converter Front Chassis TYPE C Plug-in Port
- PH73 supports all motherboards and meets the standard specifications of the chassis.
- PH73 can be converted into a 20pin Key A interface through the 19pin interface on the motherboard.
- Convert the function that originally supported Type A to support Type C.
- Easily expand motherboard functions without wasting the Type C interface of the chassis.
- Model: PH73A/PH73B
- Color: Black
- Transmission speed: USB3.1 Gen2 up to 10Gbps (depending on the host side transmission speed)
- Notes:
- There might be little error of size for manual measurement.
- The colors deviation might differ due to different monitor settings, please kindly understand.
- Packing list
- 1 * Converter
-
Computer Motherboard Header Adapter USB 3.0 19P/20P 90 Degree Desktop Converter Desktop Computer Accessories
- USB3.0 19/20Pin Steering Joint Socket Desktop Computer Motherboard Vertical Pin Holder 90 Degree Elbow Plug Port Steering Joint
- 100% brand new and high quality
- Using multilayer circuit board to connect.
- USB3.0 high speed signal lossless transmission.
- Solve the problem that the 19p cable directly inserted into the motherboard is not small enough to break the motherboard pin
- The notch for the motherboard 19P interface is located on the inside of the motherboard, please choose model A .
- The notch on the motherboard 19P interface is facing the outside of the motherboard, please choose model B.
-
New PH22-C 19PIN to 2-port USB3.0 high-speed data signal lossless transmission multi-layer circuit board
- 19pin to dual USB3.0 adapter, lossless transmission, high-speed transmission, stable and compatible
- Standard 19pin interface, can quickly transfer to dual USB3.0
- Standard USB3.0 interface transmission speed up to 5Gbps (about 400m/s)
- Suitable for open chassis, connect more devices
- Vertical transfer, no interference with other positions, multi-layer PCB integrated differential signal optimization technology, stable transmission
-
New PH22B 19PIN to 2 ports USB3.0 Type-A connector adapter conversion card
- Private Mold:Yes
- Products Status:Stock
- Place of Origin:Guangdong, China
- Connector B:Dual USB 2.0 Port
- Application:Desktop
- Style:Double Layer Type
- Type:Adapter Card
- Feature:Easy to use and install
- Condition:100% Tested and working
- Connector A:9pin USB 2.0 Female header
- Product name:9pin to Dual USB 2.0 Adapter
-
USB 3.0 20pin Female Type A Splitter Connector
- product properties
- Private Mold: No
- Product status: in stock
- Brand Name: Meitk
- Origin: Guangdong, China
- Condition: 100% tested working
- Name: adapter card
- color:Black
- MOQ:1
- pack:original packaging
- type:adapter card
- Material:PCBAs
- Used to add internal USB WiFi. Can also be used to connect a 3rd party keyboard/mouse RF dongle internally, or the Microsoft XBox360/One USB dongle or PlayStation3 USB dongle for console game controllers. Provide the perfect solution
