OTHERS Products
-
T.F.SKYWINDINTL computer components new notebook 2.5 inch SD to IDE 44Pin hard disk transfer card
- First install the SD card into the slot, then connect the data cable of the hard disk to the interface of the notebook hard disk. After the power on test is normal, it can be operated and used. It’s so simple, no need to drive any more
- Note: for soft routing, SD card size within 1g is enough. If Win98, win me, WINXP and system are installed, SD card capacity is better to use more than 2GB. If you need high speed, please choose high multiple flash card… Otherwise, it is OK.
- Support: up to 128G SD card
- SD card has the characteristics of small volume, large capacity, anti-seismic and moisture-proof, high temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error. It is a popular mainstream product memory card. This adapter card allows you to connect the SD card with this advantage to the standard ATA IDE interface as a standard ide storage device.
- Standard: SD specification VER2.0, IDE / ata-33;
- Standard IDE interface: true ide mode, and supports dma-33 transmission mode;
- IDE interface is 44 pin / 2.0mm male connector;
- There are two main control chips on the board and an SD card socket on the back;
- Advantages: small occupation area, delicate design, simple operation;
- SD card can be a device that contains OS and application software and can be started directly;
- Support DMA and ultra DMA mode applicable to DOS, NT4, windows98se, me, 2000, XP, vista, MAC, Linux systems
-
New high-speed FT1307 chip SD to SATA adapter card SD card to SATA SD hard drive
- 1. Support SD card to start as SATA hard disk; (it needs SD card to support hard disk mode, if SD card does not support it, it cannot start)
- 2. Turn your SD card into a standard SATA electronic hard disk, and you can install linux, Win98, WinXP (generally not recommended to install WINXP system on SD card), DOS and other operating systems in the electronic hard disk to experience the high-speed pleasure of the electronic hard disk.
- 3. Used in embedded industrial PC to store embedded LINUX, WINCE and other operating systems, applications and data;
- 4. Motherboard and board manufacturers use this electronic hard disk to replace the hard disk for testing to improve efficiency and save costs;
- The current test has passed the SD card size to 16G.
- apply in:
- 1. For factory test(mainboard, sound card, display card, memory module, etc.);
- 2. Emmbeded computer, industrial PC, microcontroller system use this card to store emmbeded OS, such as LINUX, WINCE, or, store user’s software, data.
- 3.computer factory use edge out harddisk progress testing.
- Product Specifications:
- 1. A standard SATA data interface
- 2. A standard SD card slot
- 3. One SATA power interface
- 4. LED indication
- Both desktop and laptop are available, most motherboards are tested and compatible with stability, please rest assured to use
-
Micro SD To SATA 2.5 Inch 4 TF To SATA DIY SSD Solid State Drive Box Hard Disk Box Adapter Expansion Riser Card JM20330 Chip
- (Product does not contain tf card)
- Application: TF card (micro SD card)
- Interface: SATA
- Product Features:
- Replace SATA with 4 Micro SD cards, which can be used for system booting through Micro SD
- Support SATA hot plug
- Does not support UHS-I
- No driver required
- Support system: Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux (Note: EXT4 file system is not supported)
- Instructions for use of 4 TF to SATA adapter cards:
- 1. Before using this product, please insert the TF card into the corresponding TF socket, and then connect the SATA power and SATA data cable to the SATA host device. After power on, the LED light flashes, indicating that the TF data is read normally.
- 2. After the initial use and the TF card configuration change, the TF card needs to be initialized and formatted. After the formatting is complete, you can perform any data operations on the TF card.
- Precautions for use:
- 1. This product can use 1 TF card, 2 TF cards, and 4 TF cards at the same time. It does not support 3 TF cards at the same time.
- 2. Please pay attention to the card insertion sequence when using: when using 1 TF, please insert the TF card in the TF1 card socket, when using 2 TF cards, please insert the TF card in the TF1, TF2 card socket, and so on. If you insert the cards out of order. The product will not be able to recognize the TF card normally.
- 3. Use the same TF card as much as possible. When using TF cards of different capacities, after grouping RAID 0, the capacity is a multiple of the minimum capacity TF card and the number of TF cards. (For example, one 2G, the other 3 32G, then the minimum capacity is 2G*4=8G)
- 4. TF card does not support hot swap.
- 5. For the safety of your data, please make a backup of your important data before use.
- 6. After the TF card is set to RAID 0, the position of the TF card cannot be changed, otherwise the data may be damaged (after the TF card is initialized, the data will be damaged). Please mark the location of the TF card before use to prevent the location from being exchanged.
-
NEW Micro SD to 2.5 44pin IDE Adapter Reader TF CARD to ide For Laptop
- 100% brand new and high quality
- Compatible with PC Card Services and Socket Automatic sensing of PC Card ATA or true IDE
- Support 8-bit/16-bit data transfer on Host Data Bus.
- Integrated PC Card attribute memory of 256 Bytes.
- Automatic wake up from power-down on host reset.
- Microprocessor I/O transfer mode (High Flexibility) or automatic transfer mode (High Speed) support.
- Auto data CRC generation/check
- Standard MMC Mode Interface support.
- Support Windows 98SE/ME/2000/7/8/XP Operating System
- Quantity:1pc
- Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- Package includes:
- TF to 2.5″IDE adapter x 1
-
3.5 inch IDE notebook with MICRO SD to IDE TF TO IDE 44Pin hard disk adapter card
- The product does not include TF card!
- Product Description:
- TF card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, and no seek error. It is a popular mainstream product memory card today. This riser card allows you to use the TF card with this advantage to connect to the standard IDE interface as a standard IDE storage device.
- Features:
- Compliant with standards: TF specification Ver2.0, IDE/ATA-33 specification;
- Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode;
- The IDE interface is a 44-pin/2.0mm male connector;
- There are two main control chips on this board, and a TF card slot on the back;
- Advantages: small footprint, compact design, easy operation;
- TF card can become a device that contains OS and application software and can be directly booted;
- Support DMA and ULTRA DMA mode for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, 7, 8, 10, MAC, Linux system
- Installation Notes:
- First install the TF card into the slot, then connect the hard disk data cable to the interface of the notebook hard disk, and then it can be operated and used after power-on and detection is normal. It is as simple as that, no need to make any drivers…
- Note that for soft routing, the size of the TF card should be within 1G. For example, if installing WIN98, WIN ME, WINXP, and other systems, the capacity of the TF card should be more than 2GB. UHS-I high-speed cards are not supported….
- Maximum support for 128G SD card
-
TF To MSATA Msata To Micro SD Adapter Card Expansion Converter Riser Card Laptop SSD Card Reader
- It is a mini card (Micro SDXC/SDHC/SD) designed for notebooks that can realize SSD. The user can easily insert the TF card into the card slot of the notebook by using this MR card.
- Main features:
- Designed for notebooks
- MicroSD card reader,
- Compatible with Windows 7 / Vista / XP and Mac OS
- Support Windows general mass storage devices.
- Support operating system: Windows ME/2000/XP/Vista/7/8/10 and Mac
- Complies with Secure Digital Card (SD) specification up to ver. 3.0 (SDXC).
- Integrated hardware DMA engine enhances overall performance of data transfers.
- Installation Notes:
- First install the TF card into the slot, and then insert the notebook MSATA interface, the power-on test is normal and it can be operated and used
-
NGFF M.2 A/E KEY wireless network card interface to Micro SD SDHC TF card reader transfer card
- Description:
- 100% brand new and high quality.
- Feature:
- USB specification compliance:
- Comply with 480Mbps Universal Serial Bus specification rev.2.0.
- Comply with USB Storage Class specification rev.1.0.
- Support one device address and up to four endpoints: Control (0)/Bulk Read (1)/Bulk Write (2)/Interrupt (3) / Integrated USB building blocks.
- USB2.0 transceiver macro (UTM), Serial Interface Engine (SIE), Build-in power-on reset (POR) and low-voltage detector (LVD),Secure DigitalTM (SD) and Multi Media Card TM (MMC).
- Supports SD specification v1.0 / v1.1 / v2.0 / SDHC (Up to 32GB).
- Compatible with SDXC (Up to 2TB).
- Supports 1/4 bit data bus.
- Support boost mode for SD3.0 for better performance.
- Support LED function to indicate power and access status.
- System requirement:
- for One free M.2 key A.E. socket(WiFi slot).
- for Windows 7/8/10, for Mac OS.
- Adapter Card only, other accessories demo in the picture is not included!
- Specificatins:
- Item Type: Adapter Card
- Material: Plastic
- Size: 30x22mm/1.18×0.87in
- Color: As shown
- Quantity: 1 Pc
- Note:
- Transition: 1cm=10mm=0.39inch
- Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- Package Includes:
- 1 x Adapter Card
-
TF to NGFF M.2 transfer card embedded industrial mobile Micro SD SDHC TF card reader transfer card
- TF(micro-SD) to NGFF(M.2) adapter card embedded industrial mobile SSD
- Main functions: TF card, also known as micro-SD card, has the characteristics of small size, large capacity, shock resistance and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, and no seek error. It is a popular mainstream product memory card today. This adapter card converts TF (micro-SD) card into SSD with NGFF (M.2) interface.
- Application fields: industrial computer motherboard, industrial computer, tablet computer, soft router, POS machine, hard disk video recorder.
- Main performance:
- ① Taiwan S682 program.
- ② Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems.
- ③ Equivalent to industrial use, it can flexibly plug and unplug SSD, and use TF as a mobile hard disk to realize flexible movement of data storage.
- ④ After the hard disk is transferred, it can be used as a system startup disk or a data disk.
- ⑤ TF supports high-speed cards.
- ⑥ TF supports up to 128GB as measured so far, and there is no upper limit in theory.
- ⑦ Compatible with SATA GEN1 and GEN2, the transfer rates are 1.5Gbps and 3.0Gbps respectively. The data transmission rate reaches 150MB/s and 300MB/s respectively.
- ⑧ Support plug and play together with BIOS and operating system, and can be used without any driver. It is recommended to cold-swap after shutdown to realize mobile storage of data, do not hot-swap TF and NGFF (M.2).
- ⑨ Size: Compatible with NGFF (M.2) SSD size. Can be used on desktops and notebooks.
- Precautions:
- ① Before using this product, please insert the TF card into the corresponding TF socket first, and then insert it into the NGFF (M.2) slot in the off state. After starting up, the LED light flashes, indicating that the TF card data is read normally.
- ② After using for the first time or changing the configuration of the TF card, the TF card needs to be initialized and formatted. After formatting, you can perform any data operations on the TF card.
-
T.F.SKYWINDINTL MICRO SD TF to SATA TF card change hard disk notebook desktop universal SSD transfer card
- The product does not include TF card!
- Name: TF to SATA adapter card
- Model: SINTECHI001
- Applicable: TF card (micro SD card)
- Interface: SATA
- Product Features:
- Use Micro SD card (TF card) instead of sata, and the system can be booted through Micro SD
- Support sata hot plug
- no driver required
- Does not support UHS-I
- Support system: Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux (Note: EXT4 file system is not supported)
- TF card to SATA adapter card instructions:
- 1. Before using this product, please insert the TF card into the corresponding TF socket, and then connect the SATA power supply and SATA data cable to the SATA host device. After starting up, the LED light flashes, indicating that the TF card data is read normally.
- 2. After the initial use and TF card configuration changes, the TF card needs to be initialized and formatted. After formatting, you can perform any data operations on the TF card.
- Precautions for use:
- 1. The TF card does not support hot swapping.
- 2. For the safety of your data, please back up important data before use.
-
TF/SD to SD card extension board SD test card set TF card test PCB
- TF/SD to SD card extension board SD test card set SD card extension board, TF test card set card test PCB
- TF/SD to SD card extension board
- Applicable scope: smartphones, PDAs, MP3, MP4 players, voice recorders, digital cameras, GPS navigators, tablet computers
-
600Mbps Dual Band Free Drive USB WIFI Adapter 2.4GHz/5.0GHz Dongle PC Network Card Ethernet 802.11AC Laptop Desktop Support Windows XP Vista/7/8/10 Mac OS X 10.4 10.12
- Product Description
- IEEE Standard 802.11b/g/n
- Security support 64/128-bit WEP (Wired Equivalent Privacy), WPA & WPA2 (Wi-Fi Protected Access)
- Frequency Range 2.402-2.480 GHz / 79 Channel FHSS
- Channel 1-11 channels (US), 1-13 channels (EU), 1-14 channels (Japan)
- Transfer rates (Max) 802.11n 600 Mbps(Max), 802.11g(54 Mbps), 802.11b(11 Mbps)
- Modulation Technique 802.11n: OFDM / 802.11g: OFDM / 802.11b: DSSS
- Receiving Sensitivity -80dBm at 0.1% BER
- Output Power 16~18dBm(CCK), 13~15dBm(OFDM)
- Antenna Integrated Antenna
- Interface USB 2.0/3.0
- OS Support Windows 2000, XP 32/64, Vista 32/64, Windows 7.8.10, Linux, Macintosh
- Environment Temp. Operation Temp.: 0 ? ~ + 55 ? / Storage Temp: -20 ? ~ + 90 ?
- About this item
- HIGH SPEED DUAL BAND WIFI: This usb wifi adapter’s maximum speed up to 5GHz 433Mbps or 2.4GHz 150Mbps. Ideal for gaming online and seamless HD video streaming. Ultra-fast AC600 wireless adapter speed
- USB2.0 Hi-speed connector, supports operation system: for Windows 7 / 8 / 8.1 / XP/ Vista, for Linux and for Mac OS.
- Dual band reduces interference for better wireless transmission. 5G WiFi is ideal for online gaming and seamless HD video streaming.
- By using Wireless Network Adapter, you can upgrade your PC, laptop or for Mac to work with the latest AC WiFi router.
- 802.11ac standard, the latest and most powerful wireless WiFi technology, 3 times faster than wireless N speeds.
-
Free Driver USB WiFi Adapter for PC, AC600M USB WiFi Dongle 802.11ac Wireless Network Adapter with Dual Band 2.4GHz/5Ghz
- WiFi Adapter maximum speed up to 5GHz 433Mbps or 2.4GHz 150Mbps. Ideal for gaming online and seamless HD video streaming.
- Compatible with Windows 10/8/7/XP, MAC OS, Linux etc, NOT support chromebook, NOT support TV, Projector, Printer. Supports 802.11ac standard, backward compatible with 802.11 a/b/g/n.
- Works with any WiFi Routers. By using wifi adapter for desktop pc, you can upgrade your Desktop, Laptop, PC to work with the latest dual band router for faster speed and extended range.
- 2dbi External Antenna providing even better wireless performance. Free driver, no need CD or download the driver online.
